🔌 Universal Industrial Gateway

Multi-Protocol Field Data Acquisition

One lightweight software agent replaces expensive protocol converters. Deploy on any Linux/Windows edge device — connect meters, inverters, batteries, compressors, and heat meters to FYXO Cloud in minutes.

Modbus TCPModbus RTUSunSpecDLMS/COSEMDL/T645M-Bus

Protocols6

Devices Connected7

Cloud Reports0

Uptime0m 0s

Setup Time<10 min

⚡

Eastron SDM630

192.168.1.102:502

Modbus TCPmeter

☀️

Huawei SUN2000-10K

192.168.1.100:502

SunSpecinverter

🔋

BYD HVS 10.2

192.168.1.101:502

Modbus TCPbattery

🏭

Atlas Copco GA37

COM4 @ 9600

Modbus RTUcompressor

⚡

Kaifa MA309

192.168.1.105:4059

DLMS/COSEMmeter

⚡

DL/T645 Smart Meter

COM3 @ 2400

DL/T645meter

🌡️

Kamstrup Multical 403

192.168.1.110:10001

M-Busheat meter

📡 Gateway Console

╔══════════════════════════════════════╗
║        FYXO Gateway v0.2.0          ║
║  Multi-Protocol Field Connector     ║
╚══════════════════════════════════════╝
  Cloud: https://www.fyxo.io/api/gateway/telemetry
  Devices: 7 | Protocols: Modbus TCP(2), SunSpec(1), Modbus RTU(1), DLMS(1), DL/T645(1), M-Bus(1)
  Report: every 15s
  ↑ Reported 7 devices to cloud

Solution Brief

Problem

Industrial sites use 5-10 different protocols. Hardware protocol converters cost €2-5k each, require vendor lock-in, and create data silos. Field engineers spend weeks on each integration.

Solution

FYXO Gateway is a single software agent that speaks all major industrial protocols natively. Install via npm, configure device addresses in JSON, start collecting data in minutes — not weeks.

Impact

90% cost reduction vs hardware converters. Unified data pipeline into FYXO Cloud for AI-powered energy optimization. Zero vendor lock-in — open configuration, standard protocols.